建材防火測試產品范圍：地板，墻板，天花，保溫材料，石膏板，人造石，水泥纖維板，壁紙，木塑，硅酸鈣板，隔音材料，玻璃鋼，竹木制品，建筑涂料，門窗，鋁塑板，蜂窩板，建筑玻璃，裝飾織物，彩鋼板，建筑發泡材料，膠凝材料和膠粘劑等

防火測試項目：防火評級，可燃性，難燃性，不燃性，燃燒釋放熱量，著火性，氧指數，毒性指數，產煙量，燃燒滴落物，煙密度等。

建材阻燃測試標準：

EN 13501-1:2007FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS. CLASSIFICATION USING TEST DATA FROM REACTION TO FIRE TESTS 建材阻燃分級標準

建材阻燃

引用的測試方法：

EN ISO 1182建筑制品燃燒性能試驗—不燃性試驗(類似GB/T 5464)

EN ISO 9239-1鋪地材料燃燒性能測定—輻射熱源法院(類似GB/T 11785)

EN ISO 1716 建筑材料燃燒熱值試驗方法(類似GB/T 14402)

EN ISO 13823建筑材料或制品的單體燃燒試驗(SBI)(類似GB/T 20284)

EN ISO 11925-2 建筑材料可燃性測試，第二部分: 單一火源測試. (類似GB/T 11785)

NF P 92-507:2004 Fire safety-building-Interior fitting materials-classification according to their reaction to fire 建筑內飾材料對火反應分級

M0~M4對應的測試方法包括：北京鑫生卓銳科技有限公司供應燃燒性能測試設備。

NF P 92-501， Fire safety — Building — Testing how materials react to fire — Radiation test applicable to materials that are or have been made rigid (materials with bonded claddings) of any thickness and to flexible materials more than 5 mm thick.

NF P 92-503， Fire safety — Building — Testing how materials react to fire — Electric burner test applicable to flexible materials.

NF P 92-504， Fire safety — Building — Testing how materials react to fire — Persistence test and test measuring flame propagation speed.

NF P 92-505， Fire safety — Building — Testing how materials react to fire — Test applicable to fusible materials: drip test.

NF P 92-506， Building — Testing how materials react to fire — Panel-heater test for floor coverings.

EN ISO 1716 Testing how building products react to fire — Determining combustion heat

GB 8624-2006 建筑材料及制品燃燒性能分級/Classification for burning behavior of building materials and products

GB/T 20285-2006 材料產煙毒性危險分級/Toxic classification of fire effluents hazard for materials

BS 476-6:1989+A1:2009 Fire tests on building materials and structures. Method of test for fire propagation for products 建筑制品火焰增長測試方法

BS 476-4:1970(AMD 1983) Fire tests in building materials and structures Part 4: Non-combustibility test for materials 不燃性測試

BS 476-5:1979 Fire tests in building materials and structures Part 5: method of test for ignitability 點燃性測試

DIN 4102 - Part 1， B1 (1998)， Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame. 建筑材料對火反應

ASTM E 84-15 Standard Test Method for Surface Burning Characteristics of Building Materials 建筑材料表面燃燒特性測定

GB 50222-2001 建筑內部裝修防火技術規范/Code for fire prevention in design of interior decoration of buildings

GB 9978-1:2008 建筑構件耐火試驗(ISO 834-1:1999 MOD)/Fire-resisitance tests - Elements of building construction Part 1: general requirements

BS 476-20/22:1987 Fire tests on building materials and structures Method for determination of the fire resistance 建筑構件耐火試驗

ASTM D 2843:1999(2004)e1 Standard Test Method for Density of Smoke from the Burning or Decomposition of plastics 塑料煙密度

ISO 5660-1:2002 Reaction-to-fire tests - Heat release， smoke production and mass loss rate - Part 1: Heat release rate (cone calorimeter method) 熱釋放速率－錐形量熱儀

ASTM E 648-2009a Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source1 鋪地材料－輻射熱源法

ASTM D3675-2009 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source

ISO 5659-2:2006 Plastics- Smoke generation Part 2: Determination of optical density by a single-chamber test塑料煙密度

AS 1530.1-1994 Methods for fire tests on building materials components and structures Part 1: Combustibility test for materials

ASTM E119 - 12 Standard Test Methods for Fire Tests of Building Construction and Materials 建筑構件耐火試驗

BS 6307:1982 Method for Determination of the effects of a small source of ignition on textile floor coverings (Methenamine table)小火源對鋪地織物影響的測定方法(烏洛托品片試驗)

BS 4790:1987 Method for determination of the effects of a small source of ignition on textile floor coverings (hot metal nut method)小火源對鋪地織物影響的測定方法(熱金屬螺母法)

16 CFR 1630 (FF 1-70) Standard for the surface flammability of carpets and rugs (ASTM D 2859-04)地毯和墊子表面燃燒性能標準

16 CFR 1631 (FF 1-70) Standard for the surface flammability of small carpets and rugs小地毯和墊子的表面燃燒性能標準

ISO 6925:1982 Textile floor coverings - Burning behaviour-Tablet test at ambient temperature (Methenamine table)鋪地織物.抗燃性.室溫下的烏洛托品片試驗

GB/T 11049-2008 地毯燃燒性能－室溫片劑試驗方法/Burning behaviour of Carpet - Table test at ambient temperature

GB/T 14768-1993 地毯燃燒性能45度試驗方法及評定/Carpet burning behaviour-Test method at 45 and assessment

SOR 91-264 Hazardous Products (Carpets) Regulations (Method F-04:2004 TEST METHOD FOR EVALUATING TEXTILE FLOOR COVERINGS FOR FLAME RESISTANCE)加拿大危險產品(地毯)法規(測試方法F-04:2004 紡織品鋪地材料阻燃測試)

CNS14705-A3386-2008 Method of test for heat release rate for building materials - cone calorimeter method 建筑材料燃燒熱釋放率試驗法－圓錐量熱儀法